INPUTS AND OUTPUTS / NUMBER OF CHANNELS | INPUTS: | MIC/LINE : 6 |
| | LINE : 2 |
| OUTPUT: | MASTER OUT : 1 |
| | MASTER OUT (PHONES) : 1 |
| | MONITOR OUT (PHONES) : 3 |
INPUTS | MIC/LINE: | Type: XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT) |
| | Input gain: +10 – +54 dB/–3 – +41 dB (when Hi-Z ON) |
| | Input impedance: XLR: 3 kΩ |
| | Input impedance: TRS: 3 kΩ/1 MΩ (when Hi-Z ON) |
| | Maximum input level: –2 dBu when –26dB switch OFF (at 0 dBFS) |
| | Maximum input level: +24 dBu when –26dB switch ON (at 0 dBFS) |
| | Phantom power: +48 V |
| LINE: | Type: TS phone jack |
| | Input impedance: 10 kΩ |
| | Maximum input level: +3 dBu |
| SMARTPHONE CONNECTION JACK: | Type: TRRS mini jack (4-contact/TIP: L, RING 1: R, RING 2: GND, SLEEVE: MIC) |
| | Input impedance: 10 kΩ |
| | Maximum input level: +3 dBu |
OUTPUT | MASTER OUT: | Type: XLR jacks (balanced) |
| | Maximum output level: +14.5 dBu |
| | Output impedance: 100 Ω |
| MASTER OUT (PHONES): | Type: Standard stereo phone jack |
| | Maximum output level: 10 mW + 10 mW (60Ω load) |
| | Output impedance: 10 Ω |
| MONITOR OUT (PHONES): | Type: Standard stereo phone jack |
| | Maximum output level: 10 mW + 10 mW (60Ω load) |
| | Output impedance: 10 Ω |
BUSES | MASTER: | 1 |
| MONITOR: | 3 |
| SEND EFX: | 1 |
CHANNEL STRIP | LOW CUT: | 75 Hz, 12 dB/OCT |
| EQ: | HIGH: 10 kHz, ±15 dB, shelving |
| | MID: 2.5 kHz, ±15 dB, peaking |
| | LOW: 100 Hz, ±15 dB, shelving |
| LEVEL METER: | 9 segments |
| SEND EFFECTS: | 8 types |
RECORDER | MAXIMUM SIMULTANEOUS RECORDING TRACKS: | 12 at 44.1/48/96 kHz |
| MAXIMUM SIMULTANEOUS PLAYBACK TRACKS: | 10 |
| RECORDING FORMAT: | WAV 44.1/48/96 kHz, 16/24-bit, mono/stereo |
| RECORDING MEDIA: | 4GB–32GB SDHC-compliant cards (Class 10 or higher) |
| | 64GB–512GB SDXC-compliant cards (Class 10 or higher) |
AUDIO INTERFACE | 44.1/48 KHZ: | Recording: 12 channels |
| | Playback: 4 channels |
| BIT DEPTH: | 24-bit |
| INTERFACE: | USB 2.0 |
SYSTEM REQUIREMENTS FOR AUDIO INTERFACE MODE | WINDOWS: | OS: Windows® 7 SP1 or later / 8.1 / 10 (32bit/64bit) |
| | CPU: Intel® Core i3 or faster* |
| | USB: USB 3.0/USB 2.0** |
| | * Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD. |
| | ** Only USB host controllers with Intel Chipsets are supported. Operation is not guaranteed when used with USB hubs or expansion cards. |
| MAC: | OS: macOS 10.12 / 10.13 / 10.14 / 10.15 |
| | CPU: Intel® Core i3 or faster |
| | USB: USB 3.0/USB 2.0* |
| | * Operation is not guaranteed when used with USB hubs or expansion cards. |
| IPHONE/IPAD: | OS: iOS 10 / 11 / 12 / 13 |
| | * Apple Lightning-to-USB Camera Adapter required. |
CARD READER | CLASS: | Mass storage USB 2.0 High Speed |
| SAMPLING FREQUENCY: | 44.1/48/96 kHz |
| FREQUENCY RESPONSE: | 20 Hz – 20 kHz: –1 dB at 44.1 kHz |
| | 20 Hz – 40 kHz: –3 dB at 96 kHz (when GAIN at 3 o'clock) |
| EQUIVALENT INPUT NOISE: | –121 dBu or less (IHF-A) at +54dB/150Ω input |
| DISPLAY: | LCD with backlight (96×64 resolution) |
| POWER: | 4 AA batteries (alkaline, lithium, or rechargeable NiMH) |
| | AC adapter (ZOOM AD-17): DC 5V/1A |
| | Supports USB bus power |
| ESTIMATED CONTINUOUS RECORDING TIME USING BATTERIES: | Recording 44.1kHz/16-bit/4ch audio to SD card (when 48V is OFF, LCD BACKLIGHT is 15sec, BATTERY SAVING is ON and headphone impedance is 62Ω): |
| | Alkaline batteries: about 2 hours |
| | NiMH batteries (1900 mAh): about 3.5 hours |
| | Lithium batteries: about 6.5 hours |
| | • The above values are approximate. |
| | • Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.POWER CONSUMPTION: |
| POWER CONSUMPTION: | 5 W |
| EXTERNAL DIMENSIONS: | 268 mm (W) × 282 mm (D) × 74 mm (H) |
| WEIGHT (UNIT ONLY): | 1.56 kg |