This is a used Alto TS115W loudspeaker with a huge 400W output. It is approximately one year old and has only been used a handful of times. It is therefore in exceptional condition and represents fantastic value for money.
The TS115W brings you a host of features which make it the ideal unit for either permanent installations or as a portable PA system. It has an efficient 'class D' amplification system and excellent design and most importantly wireless connectivity which makes this system incredibly versatile. You can now use your iPad, iPhone and any other Bluetooth compatible device to play your music with a clean and crystal clear sound quality.
This unit can either be mounted on a speaker stand with the standard 36mm pole mounting inserts but can also be hung using the six M10 rigging points.
Built-in Bluetooth® A2DP wireless technology
Wirelessly stream audio from any Bluetooth-compatible device
Stream stereo signal, left and right, to separate speakers”no cables required
Use as traditional PA loudspeaker or floor wedge monitor
800 Watts Class D power
15 low-frequency transducer, 1 neodymium driver
Two mic/line combo inputs with independent volume controls
XLR output to link speakers
Lightweight, trapezoidal cabinet with handles
Stand and pole-mountable or flyable
Contour switch for increased EQ control
Clip Limiter with red LED
Accurate audience coverage, not just on-axis
Designed and tuned in the USA
This is what Alto Professional have to say:
You've never experienced professional live sound speakers like this.The TS112W and TS115W bring you all the premium features you've come to expect from Alto Professional: massive wattage, efficient Class D amplification and cutting-edge design.
Add to all of this: unprecedented wireless connectivity. Now, you can harness that same massive wattage and clean, crystal clear sound using your iPad, iPhone or other Bluetooth-compatible device such as a laptop computer.The TS112W and TS115W are professional loudspeakers, equipped with all the connections you need to hook up using traditional cables. Whether you use them in a permanent sound reinforcement installation or as portable PAs, you'll have versatile loudspeaker that can handle every gig, and blast music from your phone at the after party.
The TS112W and TS115W provide exceptionally clean, transparent sound from wired or wireless sources.The drivers in the Truesonic TS115W are designed to make sure that virtually no energy is wasted. That translates to more of the power from the amplifier actually working to generate sound rather than heat, giving the speaker better real world performance than other speakers with comparable published specifications.
The Truesonic TS115W offers a 15" LF driver (2" voice coil) and a 1" HF neodymium driver . Every active Truesonic speaker benefits from the use of a Class D amplifier integrated into the cabinet. Class D amps are generally lighter than Class A and AB amplifier designs, and offer more than enough power to provide your performance with plenty of punch. The Truesonic TS115W delivers with 800 Watts of power and offers a balanced combo jack (XLR/TRS) input with level control. Class D amplifiers are also highly efficient and run cooler than other kinds of amps so the amp doesn't have to work as hard to deliver your mix.
More details in the specification tab
|Transducer Low||15" Woofer, with 2 voice coil|
|Transducer High||Neodymium compression driver, 1 exit with 1 voice coilPower|
|Amplification||800 Watts peak (670 W LF + 130 W HF), 400 Watts continuous (335 W LF + 65 W HF)|
|Frequency Range||(-10 dB): 42 Hz -20 kHz|
|Frequency Response||(±3 dB): 53 Hz -19 kHzMaximum SPL @ 1m: 126 dB peak, 123 dB continuous-6 dB|
|Nominal Coverage||(80 / 100 H x 60 V)|
|Active Crossover||2.5 kH|
|Wireless Connectivity||Bluetooth (A2DP)|
|Up to 30'Connectors||2 x Mic / Line Female XLR - 1/4 combo inputs, 1 x Loop - Out Male XLR|
|Input Control||Line / Mic - to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms|
|External Controls||Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch|
|Protection Features||Over-excursion, Thermal, Driver|
|AC Power||100 VAC, or 110 “ 120 VAC, or 220 - 240 VAC (50 / 60 Hz)|
|Enclosure||Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille|
|Mounting||Integrated pole-socket (36 mm dia.)|
|Two handles||5 M10 threaded sockets: 2 top, 2 bottom, 1 pullback|